UK DryWall Limited

Unit 22,

Sandleheath Industrial Estate

Fordingbridge

Hampshire

SP6 1PA

Maxit Machine Applied Onelite External Renders

A Stunning Selection Of Single Coat Renders
maxit renders have been used throughout Europe for over 25 years. Incorporating single coat hand and machine applied products, and multi-layer insulated systems, the maxit range has a render solution for almost any requirement.

Our single coat range comprises five main products – Onelite MQ (machine applied), Onelite RG, RF and R (machine or hand applied) and Onelite P (hand applied with decorative stone added). These are supported by complementary primers and paints.

Fast-Track Through-Coloured, Weather Resistant & Durable
All Onelite products are manufactured in modern plants, conforming to the most stringent ISO 9001 quality standards. Premixed at the factory so that only water is required for mixing, they provide you with a fast-track, through-coloured, weather-resistant and durable solution which can be applied to masonry, natural stone and concrete.

In addition to a broad range of standard colours and finishes, a colour matching service is available, allowing you to produce beautiful new-build and refurbished buildings in an unlimited number of finishes.

A Host Of Benefits

Onelite MQ
Onelite MQ is a machine applied, through-coloured single coat render which can be applied to most substrates. It can be used for new build and renovation projects, normally at a thickness between 15 and 20mm.

The render is available in 12 standard colours and maxit’s colour matching service allows you to choose almost any colour to suit your design and to complement surrounding buildings.

It is mixed on site with water, applied and – depending on weather conditions – is ready for scratching within a few hours.

Onelite R, RG, and RF
Onelite RG, RF and R can be applied by hand or machine and each offers its own

Onelite RG gives you all the benefits of Onelite MQ but in an even more cost-effective hand applied form; Onelite RF provides a closer textured, fine scratched finish whereas Onelite R is a lightweight render with a coarse scratched finish for use on existing renders or aerated concrete blocks.

All are available in the standard colour range.

Onelite P
Onelite P allows you to produce a stone-chip finish using natural stone. A coloured base coat of 15 to 20mm is hand applied, allowed to cure, and then the stones are applied to the surface using a scoop. By careful selection of the stone used (usually it is sourced locally to blend in with the vernacular), you can achieve an infinite number of final finishes.

Onelite P can also be used alongside other Onelite renders to create feature details which add real character to buildings – for example around windows and doors, and in horizontal or vertical layers.

Fig.1 – maxit render systems are designed to be weatherproof, with most rainwater dispelled by run-off and ‘bounce back’.



Fig.2 – maxit renders are permeable to water vapour allowing the building to breathe.

Colour Range

Onelite Colours All Onelite renders are available in colours from our standard range. Colours from the Classic RAL chart may be available on request. Onelite MQ, RG, R, & RF 703 736 730 816 710 708 724 776 701 722 734 702       Onelite P 103 101 107 102 110 108 115 104 The reproduction of colour is as close as is possible within an internet browser. Where precise colour tolerances are vital, you are advised to view actual product samples.