METAL STUD PARTITIONING

Tel 0870 803 2271

Standard Partitions

• Knauf Standard Partitions utilising C-Stud or I-Stud, may be specified with confidence for non-loadbearing partitions and use fast drywall construction techniques.
• For both commercial and domestic partitions.
• Versatile systems to meet nearly every performance requirement.
• Minimum amount of components.

High Performance Twin Frame

• Knauf Twin Frame non-loadbearing partitions provide exceptional sound reduction properties using fast drywall construction techniques.
• Mainly used in the commercial sector (e.g. cinemas, auditoria and separating walls in apartments).
• For very high sound reduction values
• For very high fire resistance values.

Roomform & Roomform Quiet

Knauf Roomform and Knauf Roomform Quiet are non-loadbearing partitions and use fast drywall construction techniques.

• Specifically designed for internal partitioning in domestic situations.
• Very fast installation
• High sound reduction values
• Good impact resistance
• Minimum amount of components
• Creates strong and robust partition.

Separating Wall

• Knauf Separating Wall is a non-loadbearing partition using fast drywall construction techniques.
• Mainly specified for either separating one dwelling from another or separating a dwelling from a communal hallway or corridor, due to its high sound performance.
• Specifically designed to separate one dwelling from another
• High sound reduction values
• High fire resistance values.

Metal Furring

• Knauf Metal Furring can be used for most masonry backgrounds depending on the condition.
• Where the background is uneven and not suitable for Knauf Direct Bonding
• Where foil backed boards are used for the lining
• Where insulation is not required within the wall lining void
• Where only small service runs are required to be accommodated within the lining void
• For a stand-off of 20 – 35mm.

Wall Liner

• Knauf Wall Liner may be specified with confidence for application to most masonry backgrounds depending on the condition.
• Where a variable stand-off clearance is required between lining and background of between 16 and 125mm.
• Where background is out of true
• Where insulation is required within the wall lining void
• Where deep service runs are required to be accommodated within the lining void.

Independent 'I' Stud

• Knauf Independent ‘I’ Stud may be used where the background is not suitable to receive other types of lining.
• Where the wall lining is required to be completely independent of an adjacent wall structure
• For measured fire resistance.
• Where insulation is required within the wall lining void.
• Where substantial service runs and ducts are required to be accommodated in the lining void.

MF Ceiling System

• The Knauf MF Ceiling System can accept some degree of loading and is the more traditional form of application.
• This system can utilise one or more layers of a wide range of boards depending on the performance required. The boards are fixed onto a lightweight metal framework of Knauf MF Ceiling Channels and Knauf MF Perimeter Channels.
• The lightweight galvanised grid is suspended by either strap hangers or angle sections fixed to the structural soffit with soffit cleats.
• The tapered edge boards can then be taped and jointed using Knauf Jointing Compounds and Accessories or alternatively a 2-5mm skim coat of Knauf MultiCover, Knauf Pro Board Finish or Knauf Universal Board Finish can be applied to achieve a more traditional plaster finish.

C-Form 1

• The Knauf C-Form 1 Ceiling System can accept some degree of loading and uses fast drywall construction techniques.
• For larger ceiling areas (50m² and over)
• For spans over 4m
• Where deeper ceiling voids (over 450mm) are required.

C-Form II

• The Knauf C-Form II Ceiling System can accept some degree of loading and uses fast drywall construction techniques.
• For smaller ceiling areas (less than 50m²)
• For spans of 4m or less
• When economy and simplicity of application are required
• Where shallow ceiling voids (less than 450mm) are required.

Framed Steelwork Encasement

• Knauf Framed Encasements are suitable for encasements of columns, beams and other structural steelwork.
• Up to two hours fire protection is achievable
• Enables the exclusive use of Knauf Fireshield throughout the building to make direct decoration quick and easy.
• Knauf Fire Moistureshield offers moisture resistant qualities with the same level of fire protection.